im considering buying dbol arimedex and clomid in raw powder! now what would i need to cap them, and how would i know what mg they would be???

first of all, I think your physique is siiiick!

dbol you can just scoop it into a pill...that's what I do...as far as adex and clomid are concerned look into putting them in oral solutions because the doses are so small.

Look into the Cap M Quick kit. Its like 7 bucks. Ive got one but havent used it yet so I cant say how well it works. I dont see why it woundnt be easy though. Empty caps are dirt cheap too. You can get 750 "OO" caps for $8

Thanks! anyone else have any idea?

You need a "cap em quick"
Size 'O' empty gel caps.
Scales accurate to .1 or .01 of a gram.
plus a filler powder of your choice

The first batch takes the longest, as you'll need to do some weighing and recording,but if you write down the weights and use the same filler,other batches will be a lot faster to make.

Using size "O" caps you'll need a filler,as each cap holds around 500mg and thats a bit much for one cap of AAS

Lets say you just want to make some caps with 30 mg of anavar

A "cap em quick" makes 50 caps in a batch.

So you get 50 empty gel caps and weigh them,write down the weight of these empty caps.

Then you place the 50 caps in your "cap em quick" and fill them with your chosen filler {e.g creatine or taurine}
Then weigh the fill caps,write down the weight

Subtract the weight of the empty gel caps from the amount of the fill caps .Subtract the weight of the Anavar 30mg x 50 {1.5 grams}

Now you now how much filler you need. write it down {should be around 22gm filler.}

Now weigh out your Anavar{1.5 g},you can add food coloring to it which can be of help in checking how well it is mixing.
Weigh out your filler and add both together ,mix{blend in}vigorously in a small bowl or cup with a folk before placing in a sandwich bag and shaking the hell out of it.
or for larger quantities you can mix in a clean coffee grinder.

Now put 50 gel caps in the "cap em quick" and start capping em.
Fill em up,you should have the exact amount of blended powder to top them up.

.

__________________


http://www.xtremebodybuilding.net/in...referrerid=382

good info

I'm a little curious as to how you have found all of these raw powders before knowing how to do anything with them, seems a little strange in my book but maybe that is just me.

your right it is strange i know ho to make the inject but wasnt sure about the oral, im trying to deside if i should just buy my orals or make them!

this is my next cycle 500mg of Deca a week, 800mg of Sustnon a week and 420mg of D bol a week! ill take any advice about this! i usally run Tren!

You make your own Sustonon?

__________________


http://www.xtremebodybuilding.net/in...referrerid=382

yes i do i make it with 100mg of all four esters!!!

after you get the hang of it you can actualy use a measuring cup to measuse your filler. as long as you weigh the active ingrediant you can be a little over on the filler. just keep tapping the capsules till the powder settles and your able to fit all the powder in.

for example I use 30ml of filler and 1g powder for x50 20mg caps

Caps are a pain at first but it gets easier as you get the hang of it.

I found this at another site, it might help you some it helped me out alot.



WRITTEN BY BASE LINE

Capping Orals for Dummies!

--------------------------------------------------------------------------------



You are going to need a digital scale. Also you are going to need a capping machine. You can use a "Cap M Quik" machine which is what I use. Easy and inexpensive. I am sure you guys are already familiar with this machine. The machine Caps 50 capsules at a time. I personally used size 0 caps because I already purchased them. I would use the smallest caps you can find so the error rate will be minimal. Don't freak out because size 0 caps will still work fine...lol

No more worries when capping Fellas, heres the deal: Each filler has a different volume. Each powder has a different volume. Each cap with a different amount of powder and filler will yield a different weight.

For filler, I use a dark chocolate protein powder as filler. Try not to use a "gritty" or "sticky" substance as filler. The best filler would be a substance that is very dry and loose. Something that does not stick together like Glutamine Powder, Corn Starch, or Protein Powder. The reason why I mentioned a darker protein powder is because when you mix in the "Vitamin powder" which is usually white, you are able to see if the mix is consistant enough. So If your mix is dark with white spots everywhere you still need to mix some more until the powder has a very consistant.


Take the 50 empty capsules and weigh them(weigh all 50 at once if possible), write that number down. Next, put them in the tray, and fill them with the filler only. Then weigh all 50 again, write that number down. (You can now uncap those or toss them or whatever you want to to with them). From here subtract the weight of the empty capsules from the weight of the full capsules. Now you can keep that number and remember the ratio you used, or what kind of filler you used, and you will know EXACTLY how much filler you need.

Now, you have the TOTAL weight of filler you need for 50 caps. Next you need to find out how much powder you need. Let's say you are making 10mg caps, you multiply 50 by 10mg and you get 500mg. The next step is to subtract 500mg from the TOTAL filler needed to fill the entire cap, and you get Xmg. Now all you have to do is mix Xmg of filler with 500mg of Vitamin powder. Then you have to MIX THE SHIT OUT OF IT...LOL Mix and mix and mix and mix. Basically mix it until you feel comfortable that it is mixed well enough.

Now, all you have to do is fill up the tray with 50 empty caps and add the mix to the caps exactly like you did the first time (If you press harder or softer or don't use the tamper the same way you may have more or less in the caps.) You should use up all of the mix, it should be exactly the correct amount to fill up all of the caps with no more no less. Don't worry if you have a tiny but more or less.

Another thing you can do if you want (or have one) is to grind up the mix with a mortar and pestal to break up the chunks if any.

Thats about all I can think of. Every once and a while I get a little extra mix, could be a couple factors but I have never had any problems, just don't let it bother. Also just to let you know you might fudge up your first time, I know I did. It happened my first few times, but thats part of the learning curve, you just gotta try. So if you'd like you could practice a few times without the Vitamin Powder, if you don't have a lot.

__________________
DGAF
ADMIN @ MP
MOD @ MH, XBB, BBE
http://www.xtremebodybuilding.net/index.php?referrerid=101

I knew where to get powders years ago. just started learning about using them .. so I dont think it is all that strange. matter of a fact my 1st powder ever was sent to me free. I learned from there.

I havent capped for a long time but it is a lot easier than you can possibly imagine. it just takes the right formula. I really wish I could remember the article I read on it.

LOL we gotta talk.